TECHNICAL Vertical Sliding Door

Sliding on lateral guides and anti-friction counter-slides.

Made from a single panel with sheet metal on both external faces with programmed deformability. Internal insulating pack. The door is supplied fully assembled and ready to be fastened to the wall.

Made with modular, custom-sized panels assembled through patented male/female coplanar joints and fixed on both sides with exposed screws (included in the supply). Sheet metal on both external faces with programmed deformability. Internal insulating pack.

Assembly sequence is guided and simplified thanks to the complete preparation of all components, factory-coded with numerical progression on the panels.

Recessed handles on both sides of the leaf, positioned on the lower edge.

Adjustable balancing counterweights.

Hydraulic speed-control device VTK (Viscotroller® – Kalipè®).

Standard with electromagnet.

• on solid load-bearing masonry or reinforced concrete
• as a window installation
• on insulated and protected load-bearing metal structures

Static calculations are the responsibility of the customer.
Door to be installed indoors, not exposed to air drafts.

Doors are made of galvanized steel sheet and finished with an eco-friendly industrial base coating using high-quality epoxy resins, providing protection against corrosion from a wide range of aggressive agents, acidic or not, in environments not directly exposed to the natural outdoor atmosphere.
Standard colour RAL 7035. A wide RAL and NCS range is available on request.

Also available in stainless steel AISI 304 or 316 (accessories excluded).

Applied on the shell handle with the appropriate CE mark and with personalized polychrome CARD with identification data.

Consisting of:

• DoP declaration of performance as per UNI EN 13241
• declaration of conformity with machinery directive
• installation, use and maintenance manual
• installation instructions

• Average nominal weight 51 kg/m² wall opening
• Nominal thickness 100 mm